Your browser does not support JavaScript!
M47D20O1 (M47N)
Placeholder
CVRB/CVRA
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
cdnc
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CDHA
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
OM642.930
Low Stock
£2,495.00 Excl VAT
GBP£2,994.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
UHFB/UHFA
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
DRRB/DRRA
Low Stock
£1,845.00 Excl VAT
GBP£2,214.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CDHB/CABB
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
QYBA
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N57D30O0
Low Stock
£2,495.00 Excl VAT
GBP£2,994.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
G9U754
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
DRRB
Low Stock
£1,795.00 Excl VAT
GBP£2,154.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N57D30T0
Low Stock
£2,995.00 Excl VAT
GBP£3,594.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
224DT (QJB2)
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CFGB
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CGLC
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N16B16MO (N16B16A)
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CBZB
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
bwa
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N42B20
Low Stock
£1,795.00 Excl VAT
GBP£2,154.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
cayc
Low Stock
£1,395.00 Excl VAT
GBP£1,674.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
HCPA/HCPB
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
A18XER
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
cdnb
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CAAB
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
10P/15P
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
W11B16A
Low Stock
£1,195.00 Excl VAT
GBP£1,434.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
QJ2R
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
DV6BUTED4 (9HT)
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
ceca
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
448S2 (M62B44)
Low Stock
£2,795.00 Excl VAT
GBP£3,354.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
BZB/BYT
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N42B18
Low Stock
£995.00 Excl VAT
GBP£1,194.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
YD22DDTI
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
m9r
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
M271.948
Low Stock
£1,795.00 Excl VAT
GBP£2,154.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N16B16U0 (N16B16A)
Low Stock
£1,795.00 Excl VAT
GBP£2,154.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
25k
Low Stock
£995.00 Excl VAT
GBP£1,194.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
axd
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
K9K704
Low Stock
£995.00 Excl VAT
GBP£1,194.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CYRA/CYRB
Low Stock
£1,795.00 Excl VAT
GBP£2,154.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
11p
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
bjk
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
224DT (DW12 TE5)
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N57D30T1
Low Stock
£2,995.00 Excl VAT
GBP£3,594.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
OM646.963
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
G9U630
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N57D30O1
Low Stock
£2,995.00 Excl VAT
GBP£3,594.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
brb
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
hcpa
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
M57N2D30
Low Stock
£2,595.00 Excl VAT
GBP£3,114.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CAWB/CCZA
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
BKG/BLN
Low Stock
£1,195.00 Excl VAT
GBP£1,434.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
kkda
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
DW10ATED4 (RHW)
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
M272.940
Low Stock
£2,995.00 Excl VAT
GBP£3,594.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
OM651.925
Low Stock
£2,195.00 Excl VAT
GBP£2,634.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
N43B20K0 (N43B20A)
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
OM611.980
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
G9U730
Low Stock
£1,895.00 Excl VAT
GBP£2,274.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
OM642.852
Low Stock
£2,995.00 Excl VAT
GBP£3,594.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
M9R692
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CKTC
Low Stock
£1,995.00 Excl VAT
GBP£2,394.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
DV6B (9HW)
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials

Engine Fitting Solutions

Here at MKL Motors we not only offer replacement engines, but also complete engine fitting solutions. Our engineering team are highly skilled engine specialists with years of experience.

Our workshop is based in a key industrial estate in Grays, Essex specifically designed to cater to the high demands of our clients engine requirements. We also have the latest state of the art diagnostic equipment to ensure vehicles are tested before completion.

All our engine fitting solutions include
  • Complete engine replacement
  • Free check of clients ancillary components
  • Service parts:
    * Petrol engine = oil, oil filter, air filter, spark plugs
    * Diesel engine = oil, oil filter, air filter, diesel filter
  • Free diagnostic assessment on vehicle
image
image

Engine Reconditioning Process

Each engine is first stripped down to its bare components. Using specialist cleaning equipment (Kerosene bath and high temperature solvent washer) all engine components are degreased and thoroughly cleaned.

image

All cylinder heads are pressure tested, skimmed, valve seats are cut and all valves are resurfaced.

image

Crankshaft journals are checked and measured to assess condition and then are polished or reground where necessary.

image

All engine block cylinders are professionally honed.

image

During the refurbishment process brand new internal components are used for the building process.

image

Once the engine is assembled, it is timed up with a brand new timing kit.

image
Placeholder
CVRA/CVRB
Low Stock
£1,695.00 Excl VAT
GBP£2,034.00 inc VAT
Delivery Information

InStock

FREE Standard delivery available*

Next day delivery available(Order before 11am Mon-Fri)

Share this page:

Product Description:

Recent Reviews


image

"I promised Khalid that i would write a review but found myself becoming increasingly more and more busy. However i felt" Read more

image

"After being ripped off and receiving bad workmanship elsewhere i tried MKL. Told them the story with a transit engine th" Read more

View All Reviews

Recent Video Testimonials